Meth kit is setup and ready to go. I tested the pump today.

I ordered 2 bungs to be installed on Wed. 1 for the external IAT, I tapped wires 1 and 6 on the MAF. and 1 for the Meth injector. (for the intake)

I am going with the post IAT meth setup per Tom Ys recommendation for a 'safe' tune.

I am also going to use the 3.33 pulley for this initial boosted tune. My 2.62 pulley will go on later if I am not happy with my results.

Dyno tune with blower and meth on happens Thursday(im hoping)

 

I chose to use Meth instead of an intercooler setup, because of my space issue. (there is barely a foot between the blower and the TB)

 

Hoping to gain at least 100 RWHP, most likely more because of meth.