logosmall
 
gotstang.com - got stang? - HOWTO: Fiberglass Subwoofer Enclosure (Pictures)
View Other HOWTOs

Fiberglass Subwoofer Enclosure (Pictures)
(How to Build a fiberglass subwoofer enclosure molded to the side of the trunk.)

Step 1: Supplies
Step 2: Making the Mold
Step 3: Mounting the MDF Ring
Step 4: Fleecing
Step 5: Making it Strong
Step 6: Before the Paint
Step 7: Preview



Mounting the MDF Ring

After the mold has been made you need to decide how you want your subs to face.

1. I cut a circle out of MDF board that would match the inner diameter of my subwoofer. The ring's thickness also matched the outside diameter of the sub so it would flow smoothly.

I cut the ring with a jigsaw. To cut out the middle drill a hole big enough to fit the saw blade in.

2. Use wooden dowles and scrap pieces of wood as the mounts.

I used a hot glue gun to hold the dowels in place.


[ click to enlarge ]


[ click to enlarge ]


Make sure the ring is sturdy and will not flex when you strech the fleece over it.


[ click to enlarge ]


This is how it looks mounted in the trunk with the ring mounted.

This is also a good time to put the subwooder in it to check for clearence

[ click to enlarge ]


[ click to enlarge ]


[ click to enlarge ]


Once the ring is mounted and stable then you need to strech some fabric over it.
 
Fuel your mustang love.
Leaderboards
gotstang owns

© 2004-2015 Gostang.com

All product names are the trademarks or registered trademarks of their respective companies

gotstang.com is not affiliated with Ford Motor Company