Headers
70mm throttle body
X-pipe
Inline fuel pump
Port and polish
Heads and a Nice Ground Cam
4.2 Stoker Kit
My very first Drag Strip pass (16.051) needs to be updated w/ new mods
Interior and System Mods
Pioneer headunit
Pioneer speakers at every hole
Rockford Fosgate 1200watt amp
2 Rockford P2 10" subwoofers
Hands-free cellular system w/ satelite transmiter and embedded microphone
Billet door pin locks
Billet gauge Bezel
Billet door lock bezels
Billet headlight knob
Billet cup bezel
Billet turn signal
Billet tilt lever
Billet coin holder delete
Billet Shifter bezel
Silver A/C plate
Polished accelorator arm
Dark Reflective Tint
How I Did It
Brake Dust Shields
For the brake dust shields, I just got some chrome paint, waited till it was time to rotate the tires,after cleaning them good w/ brake cleaner and a steel brush, masked everthing off except the dust shields and painted away pretty simple but not alot of people think about that part of the car.
Painted brake dust shields
Rear Bumper Slit Inserts
For the metal inserts, I bought some wire mesh off Ebay and simply cut it to size and slid them into place from under the bumper. I also got some little finishing nails and pushed them into the impact foam the keep the inserts from falling out. If you puch them in at and angle beside a vertcal bar between the slits you won't see the nails.
Mesh inserts behind the rear bumper slits Black and chrome pony badge
Painting my side scoops
I Painted my Stalker Side scoops by just simply sanding them down with some really high grit sandpaper followed by some adhesion promoter, primer, sand, primer, wetsand, repeat, then basecoats of black while wetsanding in between and then lots of clearcoat.
Check out my How-To on Fiberglass!!!