The mufflers finally hung up (i welded them in myself) and YES, im missing a turndown, so what? lol
UPDATED 7/31/2007
PICS!!!!!
PAINTED IN THE BACK YARD, BELIEVE IT!
Update: 7/24/2007
Ok, i've done alot more work to the car since my last post. I got it ready and painted it. I will be driving it as soon as i get the exhaust welded in and I get tag and insurance. Tell me what you thing about the progress. BTW....the pics where its red it WASN'T clear coated yet. so its not very shiny at all. I did it in my buddies back yard and I didnt get one run or any trash in it. It will look like a new car as soon as i clear it.
Update: 4/11/2007
I have pulled the Trans out because I purchased a C-6 from friend for $150 to go in, I burned the AOD up because its crap. I have picked up a B&M Tork Master 2400 stall converter and a B&M Quik Silver shifter to replace the stock mess. I also pulled the motor out AGAIN to replace the heads with a better set of E-7 that i bought from my buddy for $250. The heads have been ported, polished, cut out and had bigger valves installed, heavier springs for up to a .600" lift cam, and milled .020". I also bought a cam form the same friend for $25! Its got the lift of a stock cam but has a ton more bottom end torque and throttle response. The motor is back in and the trans will go in this weekend.
Update: 1/22/2007
I have dont alot of work to the notch over the past 5-6 months. I have pulled the engine and trans to freshin up the gaskets and install a new flywheel and starter. The car runs strong and doesnt smoke a lick (SWEET FOR $500!)
MY...HOW THINGS HAVE CHANGED
Before.....
After....
INTERIOR PAINTED
Before:
After:
WHAT SHE CAN DO..... started in 2nd gear, due to my AOD acting a fool....Got it working and ill be driving it soon.
Hey folks, I was wondering if someone out there with an 88-93 Fox convertible could do me a favor. I am looking for a picture of the of the ‘A’ pillar post window weather strip showing the weather strip and inside trim molding (the molding on the inside of the pillar post) and another detail picture of where the pillar post molding meets the door seal molding. I am redoing this and need an example – my car was repaired long before I purchased it and they kind of did a ‘custom’ job on this area. I want it to be right this time.
Thanks,
Tim
Well I dont have a vert Tim, but I think I know what your talking about. If noone can help you out that has one, let me know. I think I know where I can go to get a pic for you.
Hey folks, I was wondering if someone out there with an 88-93 Fox convertible could do me a favor. I am looking for a picture of the of the ‘A’ pillar post window weather strip showing the weather strip and inside trim molding (the molding on the inside of the pillar post) and another detail picture of where the pillar post molding meets the door seal molding. I am redoing this and need an example – my car was repaired long before I purchased it and they kind of did a ‘custom’ job on this area. I want it to be right this time.