logosmall
 
GSM# 000309
MustangLisa
Team BMC

41979

points

My 2001 GT

updated: Sep 10th 2006 @ 09:02 PM
Checkout my new website at www.MustangDanni.com 
Here is my 2001 GT
 
Danni
 
 
 

 

 

 
This is my 01's reflection in my 66
 

This is my 66's reflection in my 01
 
 
The front ends of my 01 and 66
 
 
The rears of my 01 and 66
 
 
 
 
 

Engine | 302 Stroker (2v)
Stock Aluminum Heads Ported with Crower Valve Springs and Bronze Guides
Kellogg Stroker Crank
Manley Billet Rods
CP Pistons (Mod Max)
Crower Stage 3 Cams
Typhoon Intake (polished) by Professional Products
BBK Valve Covers (chromed)
Canton Racing Road Race Oil Pan (powdercoated black)
Canton Racing Accusump Pre-oiling System
Accufab Throttle Body 75mm (polished)
Dragon Plenum (polished)
PA 130amp Alternator (chromed)
8-rib Pulley System
Fluidyne Radiator
Canton Racing Billet Radiator Reservior with TBP logo
Canton Racing Billet Power Steering Reservior
UPR Billet Caps/Covers

Power Adders | 22 psi
Vortech T-Trim Supercharger with 2.85 Pulley
Vortech Intercooler
Vortech Racing Bypass Valve
BMC Performance Aluminum Intercooler Tank
Anderson Boost Pipe (chromed)
Snow Performance Water/Methanol Injection Kit

Fuel System
60 lb. Injectors
CPR Fuel Rails
Ford GT40 Dual Fuel Pump Kit
Kenne Bell Boost-a-Pump
03/04 Cobra Fuel Tank

Drivetrain
Performance Automatic SuperComp AODE with Transbrake, Manual Valve Body
B&M Hammer Shifter
FRPP 4:10 Gears
Moser 31-spline Axles
Auburn Differential
FRPP Aluminum Driveshaft
Metco Driveshaft Loop

Body Modifications
Roush Stage 3 Front Fascia
Custom Grille with Offset Tri-bar Pony
2.5" Cowl Hood (with hood struts)

Saleen S351 Rear Fascia with Center Exhaust Exit ("SALEEN" filled in)
Saleen S281 3-piece Rear Wing
Bullitt Side Scoops

Smoke/Clear Head Lights with Xenon Bulbs
Custom Tail Lights
UPR Billet Antenna Delete
"Danni" Hand Painted on Rear Quarter Panels (by Augie's Art Works)

Interior Modifications
Corbeau VX2000 Racing Seats in Black Leather
Corbeau 5-point Racing Harnesses in LILAC

Autopower Roll Cage

Autometer Lunar Series Gauge Cluster
Autometer Lunar Boost and Fuel Pressure Gauges on "A" Pillar
Autometer Lunar 5" Tachometer
DynoJet Wideband Commander Gauge

Custom Leather "BMC" Rear Seat Delete Kit

Custom "BMC" MirroredTrunk Lid Mat
BMC Performance Battery Relocation Box
Sony CDX-MP70 (XM Radio with CD)
UPR Billet Aluminum Interior & GT Pedals
15% Tint


Suspension Modifications
Bilstein Shocks/Struts
Maximum Motorsports Full-length Subframe Connectors
Maximum Motorsports Caster/Camber Plates
Steeda Sport Springs
Steeda Front Strut Tower Brace


Brake/Wheel/Tire Modifications
13" Baer Track Brake Kit (Slotted, Drilled)
Foose Speedster Wheels (Chrome) ... Front: 18x8.5; Rear: 18x9.5
Yokohama AVS Sport Tires ... Front: 265/35/ZR18; Rear: 295/35/ZR18

Exhaust Modifications
BBK Long-tube Headers
BBK O/R X-pipe
Steeda Stainless Steel Exhaust
Custom Center Exit with Dual Polished Tips
 

Back In Black (Live)
By AC/DC
Powerlinetours.com



Next Page


 
Page Listing
My 2001 GT8846 views
My Engine1640 views
Interior1682 views
Club Page1300 views
Older Pictures823 views

Last 3 User Comments
thess6225
Jul 21st, 2009 @ 11:15 AM


“”
Replying to:
Replying to:

Hey folks, I was wondering if someone out there with an 88-93 Fox convertible could do me a favor.  I am looking for a picture of the of the ‘A’ pillar post window weather strip showing the weather strip and inside trim molding (the molding on the inside of the pillar post) and another detail picture of where the pillar post molding meets the door seal molding.  I am redoing this and need an example – my car was repaired long before I purchased it and they kind of did a ‘custom’ job on this area.  I want it to be right this time.

 

 

 

 

 

Thanks,

 

 

 

 

 

Tim

 what is your location I will let you look over my car and take the pix you need

rick

 


Add Reply

 


I appreciate the offer but I am trying to get this wrapped up for a show this weekend so not time for a visit.  I think I have my anser though.  Found out the re-man parts are different than stock.  Not the best answer for originality but it will work.  Thanks for the offer.

- Tim

plstktnkr2
Jul 21st, 2009 @ 9:19 AM


“”
Replying to:

Hey folks, I was wondering if someone out there with an 88-93 Fox convertible could do me a favor.  I am looking for a picture of the of the ‘A’ pillar post window weather strip showing the weather strip and inside trim molding (the molding on the inside of the pillar post) and another detail picture of where the pillar post molding meets the door seal molding.  I am redoing this and need an example – my car was repaired long before I purchased it and they kind of did a ‘custom’ job on this area.  I want it to be right this time.

 

 

 

 

 

Thanks,

 

 

 

 

 

Tim

 what is your location I will let you look over my car and take the pix you need

rick

 


Add Reply

 

thess6225
Jul 20th, 2009 @ 8:18 AM


“”

Hey folks, I was wondering if someone out there with an 88-93 Fox convertible could do me a favor.  I am looking for a picture of the of the ‘A’ pillar post window weather strip showing the weather strip and inside trim molding (the molding on the inside of the pillar post) and another detail picture of where the pillar post molding meets the door seal molding.  I am redoing this and need an example – my car was repaired long before I purchased it and they kind of did a ‘custom’ job on this area.  I want it to be right this time.

 

 

Thanks,

 

 

Tim

 



Advertise With GS!
 
Fuel your mustang love.
Leaderboards
gotstang owns

© 2004-2015 Gostang.com

All product names are the trademarks or registered trademarks of their respective companies

gotstang.com is not affiliated with Ford Motor Company