| View Other HOWTOs |
| Do it your self Oil Seperator (This is for any car that vents from valve covers into intake manifold or power pipe. In a supercharged application it is common for oil to make its way to the maf or in the intake causing a loss in performance and detonation along with premature spark plug ware. ) |
| Step 1: Parts needed |
| Step 2: Install of Parts |
Install of Parts |
| As far as where the filters can be installed is really up to you. I decided to install mine in the front of the engine behind the coolant overflow tank to keep it hidden from view. It is also easy to get to to remove the oil from here. To install these is really simple just run the new hose from valve covers to desired location and make sure the arrow on the filter is pointed away from valve covers. Reconnect piping to intake and blower pipe as it was before. The Oil seperators (Filters) can be supported using small L brackets and threaded screws and tap or self tapping screws or you cn tie it up with nylon tye wraps. (Both ways shown below) [ click to enlarge ] [ click to enlarge ] [ click to enlarge ] [ click to enlarge ] [ click to enlarge ] [ click to enlarge ] |
Fuel your mustang love.
Mustangs by Year
Compete
Leaderboards
© 2004-2015 Gostang.com
All product names are the trademarks or registered trademarks of their respective companies
gotstang.com is not affiliated with Ford Motor Company