logosmall
 
GSM# 000481
HerNastyNotch
stang chick

280340

points

Modifications

updated: Jun 8th 2009 @ 10:20 PM
                                                                                 



Coming soon:
 
 - billet interior door handles
 
 

Engine:

  • 4.125 bore race prepped DART 4 bolt main 363 cubic inch block
  • forged steel 4340 3.4" crankshaft (balanced to a 28oz imbalance)
  • 4340 Forged H beam rods 5.315"
  • Clevite P rod/main bearings
  • Probe SRS 2618-t6 high alloy lightweight forged pistons
  • Speed Pro high performance moly rings
  • UPR solid motor mounts
  • ARP head studs
  • Trick Flow Track Heat heads
  • Trick Flow 1.6 roller rockers
  • Trick Flow chromemoly pushrods
  • CamMotion custom grind cam (dur: 234/228, lift: 564/560, lcs: 114, cl: 110)
  • Motorcraft lifters
  • Cloyes timing chain
  • Weiand X-celerator carb intake
  • Air intake temperature sensor
  • Felpro mls head gaskets
  • Milodon 7 qt oil pan
  • Milodon oil pickup
  • ARP oil pan bolts
  • Milodon steel dipstick
  • TransDapt oil filter remote mount kit
  • Romac lightweight balancer (SFI approved)
  • MSD distributor
  • MSD-6-BTM ignition
  • MSD Blaster 3 coil
  • MSD RPM module selector
  • MSD 2 step
  • Prostart'r Nippondenso style starter
  • Griffin aluminum radiator
  • Dual 11" cooling fans - NEW! 
  • Fabricated aluminum valve covers
  • Powermaster chrome alternator


Turbocharger & Induction:

  • Borg Warner S480 80mm turbo (1.10 A/R) by Majestic Turbo 
  • Tial 50mm blow off valve
  • Tial 60mm wastegate
  • Hillman manual boost controller 
  • Air-to-liquid intercooler
  • Cobra heat exchanger
  • Dual SPAL 5.2" fans (mounted to heat exchanger)
  • 5 gallon fuel cell (mounted in trunk as water reservoir)
  • Bosch Cobra water pump 

Fuel & Tuning:

  • #10 line from tank to regulator and back
  • CSU custom Holley 4150 carb (750 cfm)
  • Extreme Velocity carb hat & 1" spacer
  • Polished billet aluminum throttle bracket 
  • Aeromotive A1000 carbureted bypass regulator
  • Aeromotive A1000 fuel pump
  • Glenn's Performance sumped gas tank

Exhaust:

  • BBK shorty headers
  • 4" down pipe
  • 4" Dynomax Bullet muffler
  • 4" dump at passenger front wheel  

Drivetrain:

  • Powerglide 2-speed automatic transmission with brake
  • SFI bellhousing
  • Deep, finned transmission pan
  • PTC 4000 stall converter
  • JW "the wheel" flexplate
  • Hurst pistol grip Quarterstick II shifter
  • Tranny cooler with fan
  • Polyurethane transmission mount
  • PST custom aluminum driveshaft
  • Driveshaft safety loop
  • Strange 33 spline axles with 5/8 studs - NEW!
  • Strange clutch-type posi unit - NEW!
  • Strange c-clip eliminators - NEW!
  • Rear end shortened 1 inch on each side - NEW!
  • Custom rear end bracing  - NEW!
  • 3.27 gears
  • Granatelli rear end girdle
  • Line lock

Weight reduction & transfer:

  • QA1 tubular k member
  • Battery relocation

Suspension, wheels & tires:

  • Lakewood 90/10 front drag shocks
  • Lakewood 50/50 rear drag shocks
  • QA1 adjustable tubular control arms (front)
  • MMR front coil over conversion (14" full race kit)
  • Sub-frame connectors
  • Steeda caster/camber plates
  • Maximum Motorsports adjustable rear lower control arms
  • Steeda adjustable rear upper control arms
  • 4 cylinder fox body rear springs
  • Steeda Bumpsteer kit
  • Flaming River manual steering rack
  • Energy Suspension bushings 
  • Ford Motorsport 5 lug axle conversion
  • Billet Specialties Street Lite wheels (15x3.5 front, 15x8 rear with MT 275/50r15) - NEW!

Interior:

  • Autometer air/fuel gauge
  • Autometer coolant temp gauge
  • Autometer oil pressure gauge
  • Autometer tachometer
  • Autometer speedometer
  • Autometer volt gauge
  • Automter fuel gauge 
  • Digital air intake charge temp gauge 
  • Autometer boost gauge
  • Autometer triple a-pillar gauge pod
  • Florida 5.0 instrument cluster - NEW!
  • UPR billet power window and door lock switches - NEW!
  • UPR billet A/C knobs - NEW! 

Exterior:

  • Kaenen Dominator hood with 4 inch cowl
  • Diamond clear headlights and corners
  • Shift light installed in cowl
  • Autometer fuel pressure gauge installed in cowl


Loading...
     
     
     
Loading...
     
     
     
Loading...
     
     
     
Loading...
     
     
     
Loading...
     
     
     
Loading...
     
     
     



Next Page


 

Last 3 User Comments
ma67cpe
Jun 20th, 2010 @ 10:07 AM


“” I love the classic, I ranked you. I painted my 67 and pics are up. Come by and check them out

CozyWorld
Oct 30th, 2009 @ 11:40 PM


“”

The ORIGINAL Bullitt!!!! How much?? IT's PERFECT!!!!!!!

CozyWorld
Oct 30th, 2009 @ 11:34 PM


“”

Great googly moogly!!!! what a STANG!! NICE!!!! Thank you very kindly for sharing!!! Much  obliged!!!



Advertise With GS!
 
Fuel your mustang love.
Leaderboards
gotstang owns

© 2004-2015 Gostang.com

All product names are the trademarks or registered trademarks of their respective companies

gotstang.com is not affiliated with Ford Motor Company