Page 2 Description - Red 1990 LX Mustang - redbass - gotstang.com
logosmall
 
GSM# 005443
redbass
up in smoke

494

points

Page 2 Description

updated: Aug 19th 2008 @ 06:13 PM

 

Been a long time since I have updated this site so here goes.
I have instaled BBk long tube headers and an off road H pipe.
I removed the AC and the smog pump and did some cleaning under the hood.

 
 
Other then the headers I have not upgraded anything infact I removed my Steeda springs that have less that 20 miles on them
every bushing on the front and the rear of the car has been replaced. After doing all this I found that my car is twisted. Car sits about 2 inches lower in the from driverside. So its now or well for better words its getting turned into a drag car that will be a track only ride. So the nice new Koni shocks came out drag shocks going in the cobra 16 wheels are getting sold and as you will see in the next pics everything inside has allready been taken out.

 
I took the car as it sits to the 1/8 mile track to see some rather slow numbers rember car is down to about 2400 pounds with road race springs and shocks still in it with street tires (lets say all I do is smoke the tires in 1 and 2).  Slow very with 9.3 beeing my best time at 80 mph and a 60 foot around 2. Here are some of my track pics.
 
Next is a pic of me about to get totaly smoked
 
And finaly me about to do the smoken.
 
In all plan for this winter is to do an EFI to carb conversion new heads drag slicks and skinys rebuild the trany with a new shifter and some upper and lower control arms for the rear so i can remove that quad shocks.





 
Page Listing
Page 1 Description5303 views
Page 2 Description978 views

Last 3 User Comments
91GT347
Jul 20th, 2009 @ 8:27 AM


“”
Replying to:

Hey folks, I was wondering if someone out there with an 88-93 Fox convertible could do me a favor.  I am looking for a picture of the of the ‘A’ pillar post window weather strip showing the weather strip and inside trim molding (the molding on the inside of the pillar post) and another detail picture of where the pillar post molding meets the door seal molding.  I am redoing this and need an example – my car was repaired long before I purchased it and they kind of did a ‘custom’ job on this area.  I want it to be right this time.

 

 

 

 

 

Thanks,

 

 

 

 

 

Tim

 

 


Well I dont have a vert Tim, but I think I know what your talking about. If noone can help you out that has one, let me know. I think I know where I can go to get a pic for you.

thess6225
Jul 20th, 2009 @ 8:18 AM


“”

Hey folks, I was wondering if someone out there with an 88-93 Fox convertible could do me a favor.  I am looking for a picture of the of the ‘A’ pillar post window weather strip showing the weather strip and inside trim molding (the molding on the inside of the pillar post) and another detail picture of where the pillar post molding meets the door seal molding.  I am redoing this and need an example – my car was repaired long before I purchased it and they kind of did a ‘custom’ job on this area.  I want it to be right this time.

 

 

Thanks,

 

 

Tim

 

GTNBY2
May 21st, 2009 @ 11:59 PM


“”

Hey guys, I finished up a couple of new pages. check them out and give me some feed back!!!!

Later,

Brad

GTNBY2



Advertise With GS!
 
Fuel your mustang love.
Leaderboards
gotstang owns

© 2004-2015 Gostang.com

All product names are the trademarks or registered trademarks of their respective companies

gotstang.com is not affiliated with Ford Motor Company